Skip to content

What Your Machine Manual Says About Water

Reviewed on November 19, 2026

Your maker's advice on water beats anything general, including this site. Makers know their boilers, their valves and their warranty terms. The trick is finding the right page for your exact model.

Finding the manual

Start with the model name or number on the machine, then look on the maker's website. Two maker support pages saved for this site show the pattern: each has its own page for a single model, with a link to download the manual.12

Pick the model that matches yours exactly. Machines that look alike can have different instructions. Wikipedia notes that home machines vary in how brew water and steam are boiled, which is part of why advice differs.3

Following your maker's water adviceFind the model name on the machineDownload that model's manualFind the water and descaling pagesSet the hardness value it asks for
Your model's manual outranks any general rule, including the ones on this site.

What to look for

Search the manual for these words: water, hardness, filter, cartridge, descale, scale. A machine's water advice is often split across several pages, so check each one.

What the two FAQ pages show is typical of automatic machines:

  • A hardness setting. One maker says descaling alerts come from a built-in counter and depend on several parameters, including the water hardness setting.2 A wrong setting means wrongly timed alerts.
  • A filter cartridge with a change schedule. For one cartridge type, the maker says it must be replaced approximately every 50 litres of water (about 13 U.S. gallons) or at least every 2 months.2
  • A priming step. If a cartridge has been changed but not primed, the FAQ says to refer to the instructions on how to prime it.1
  • Rules for manual descaling. The Krups FAQ says that after a set number of drinks it is possible to descale manually, depending on the model.1

Those are examples from two pages. Your own machine might say something different, and if it does, follow your manual.

No alert doesn't mean broken

The FAQ pages say it may be normal not to have any warning messages if your steam or hot water consumption is low.1 That's one reason a machine might stay quiet for a long while. It's also a reason to know your water, since the alert only reflects what you've told the machine.

For its machine, one maker advises descaling only once the machine warns you.2 Again, that's for that model. Other models can say otherwise.

Descaling and the label

Wikipedia warns that strongly acidic descaling agents can harm eyes and skin, so wear gloves.4 So follow the maker's steps, use the product the manual names, and read the label. Never mix one cleaning or descaling product with another.

Steam boilers can be awkward to descale, because the boiler doesn't always fill completely and the agent might not reach the top.4 That's another reason to use the maker's own procedure.

Hot water, steam and pressure are the maker's territory. Don't open the machine while it's under pressure, and don't bypass a safety feature. If the manual says to call service, call service.

Putting your number to use

Once you have the manual, you need a number to give it. Get it from your supplier's report or a home test, and convert units with the hardness page. If your machine takes a filter, the filter comparison shows what different kinds do.

Where the facts come from

  1. User manual and frequently asked questions EXPRESSO ESPRESSERIA AUTOMATIC, Krups
  2. User manual and frequently asked questions ESSENTIAL, Tefal
  3. Espresso machine, Wikipedia
  4. Descaling agent, Wikipedia