Skip to content

Alkalinity and Buffer in Espresso Water

Reviewed on November 19, 2026

Alkalinity is not the same thing as hardness, though the two get mixed up all the time. Hardness counts calcium and magnesium. Alkalinity is about how well the water resists a change in acidity.

What alkalinity is

Wikipedia defines alkalinity as the capacity of water to resist changes in pH that would make the water more acidic.1 pH is the scale that tells you whether water leans acidic or alkaline.

"Buffer" is the everyday word for that resistance. Water with plenty of buffer shrugs off acid. Water with little buffer gets pushed around easily.

Don't confuse it with the word "alkaline" in marketing. Here it just means a measured property, the same way hardness is a measured property.

How it's written down

Alkalinity is typically reported as mg/L as calcium carbonate, according to Wikipedia.1 That's the same style of unit used for hardness, so a report can show two numbers that look alike and mean different things. Always check the label next to the figure.

A worked example in Wikipedia's scaling-index section shows how far apart they can be. It uses calcium of 150 and alkalinity of 34, both in mg/L as calcium carbonate.2 The two figures don't have to match, so one doesn't tell you the other.

In a lab, alkalinity can be measured by titrating a sample with a strong acid.1 The testing page explains how titration works.

The link to hardness and scale

The two measures overlap in one place. Wikipedia says temporary hardness is caused by the presence of dissolved bicarbonate salts.2 Limescale's own page adds that hard water contains calcium, and often magnesium, bicarbonate or similar ions.3

Where bicarbonate goes when water is heatedWater holds dissolved bicarbonateHeating drives gas out of the waterBicarbonate turns into carbonateCalcium carbonate drops out as scale
Dissolved bicarbonate can turn into scale when water is heated.

Heat changes the story. Boiling promotes the formation of carbonate from bicarbonate, precipitating calcium carbonate from solution.2 On the Limescale page, the primary driver of calcite formation in pipes is the exsolution of gas.3 "Exsolution" just means dissolved gas coming out of the water.

The sources saved for this site don't say how much of the alkalinity in tap water is bicarbonate, so this page doesn't claim a share. Two other pages go deeper: limescale and water reports.

Why people say it matters as much as hardness

Coffee forums often give alkalinity equal billing with hardness. That claim is about flavor and about how a machine copes, and none of the sources saved for this site puts a number on it. So this page doesn't either.

What the sources do support is narrower. Alkalinity is its own measurement, it's reported in familiar units, and bicarbonate, the dissolved salt behind temporary hardness, takes part in scale formation. That's enough reason to look for the figure on your water report.

If your machine's maker gives a water target, follow it. The manual page shows how to find it.

Where the facts come from

  1. Alkalinity, Wikipedia
  2. Hard water, Wikipedia
  3. Limescale, Wikipedia