Skip to content

Reading Your Local Water Report

Reviewed on November 19, 2026

Your water supplier has probably already measured your water. You just have to find the page. In the United States, that page is the Consumer Confidence Report.

Finding it

The EPA requires community water systems to deliver a Consumer Confidence Report, also called an annual drinking water quality report, to their customers.1 Reports must be sent by your water supplier each year by July 1.1

Didn't get one? You can either call your local water supplier or find your report using the EPA's CCR search tool.1 [fig:finding-the-report]

This is a United States rule. Elsewhere, suppliers publish their own data under their own rules. Look for the water quality or hardness page on your supplier's website.

What the report contains

The EPA lists what a report must include. It covers the lake, river, aquifer, or other source of the drinking water, the regulated contaminants found, and phone numbers for more information.1

That's a report built around drinking-water rules. It isn't written for espresso machine owners, so look for the figures that matter to you and don't assume they're all there.

Which numbers matter for a machine

Hardness comes first. For local hardness figures, the USGS points to your local health agency or water utility.2 So if your report has no hardness line, ask the utility for it.

Hardness can differ a lot between cities. Wikipedia's Australian city list runs from very soft (Melbourne) to hard (Adelaide).3 Another city's figure won't tell you about yours.

Then there's total dissolved solids (TDS). The EPA has a secondary standard of 500 mg/L for it, with noticeable effects above that including hardness, deposits, colored water, staining and salty taste.4 Those are guidelines. The EPA does not enforce these secondary standards, and they're set for aesthetic reasons.4

The EPA also ties scale to its list. Scale builds up inside hot water pipes and boilers. The standards it relates to scale and sediments cover iron, pH, total dissolved solids and aluminum.4

In short, a report can give you these figures to write down:

  • Hardness, if it's listed. Note whether it's in ppm, mg/L or grains per gallon.
  • Total dissolved solids, and the unit used.
  • pH, which relates to scale in the EPA's list.
  • Alkalinity, if the report gives it. The alkalinity page explains the term.

Check the unit

A report might give mg/L while your machine's menu wants grains per gallon. The hardness page lists the conversions.

Treat the report as a good starting point and check it with a home test. What do home tools show? See what testers can tell you. Then see what your maker asks you to do with the number, in the maker's own advice.

Where the facts come from

  1. CCR Information for Consumers, U.S. Environmental Protection Agency
  2. Hardness of Water, U.S. Geological Survey
  3. Hard water, Wikipedia
  4. Secondary Drinking Water Standards - Guidance for Nuisance Chemicals, U.S. Environmental Protection Agency